Embassy Flag, Flagpoles


NAUTICAL FLAGPOLES, MARINE FLAGPOLES
ALUMINUM & FIBERGLASS
Ground Mounted
Nautical Flagpoles / Marine Flagpoles for Marinas, Yacht Clubs,
Commercial & Residential Boat Docks, and other marine settings.


ALUMINUM NAUTICAL FLAGPOLES
Single Mast
- 20 ft. - 80 ft.
Double Mast - 20 ft. to 70 ft.

Seamless 6063-T6 aluminum tubing, uniform conical taper of approximately 1" in every 5'- 6".
Masts up to 38'- 6" in length can be fabricated in one piece and shipped via motor freight to almost any destination.
Lengths requiring shipment in sections are factory fitted with a self-aligning internal sleeve which facilitates field assembly without welding.
Yardarm, gaff, and upper masts are attached to the lower mast with fabricated aluminum fittings. Finish is the same as on the shaft.

Nautical Flagpole with yardarm

Marine / Nautical Flagpoles
Single Mast & Double Mast

Dimensions
Shafts: 20 - 80 ft
Base diameters: 5 - 12 inches
Wall thickness: .125" - .250" + .375"
Yardarms: 6 - 16 ft
Gaffs: 5 - 14 ft

USA toll free: 800-798-5431

Finish:
Nautical flagpoles are highly polished with fine grain aluminum oxide cloths, resulting in a high quality deep luster finish that represents the ultimate in architectural finishes for aluminum flagpoles and remains maintenance free. The unexposed portion of the shaft which will be below grade, is coated of asphaltum paint.

Optional finishes: White powder coat, Clear Anodized, Bronze Anodized, Black Anodized.

Standard Fittings:
Ball: #14 ga. aluminum, with a flush seam and gold anodized finish.
Truck: Cast aluminum, single halyard, revolving, complete with 26 stainless steel ball bearings and one 2 3/8" diameter cast nylon sheave.
Halyards: Four sets of #10 (5/16") white waterproof polypropylene, each equipped with two plated swivel snaps to secure the flag.
Cleats: Four 9" cast aluminum cleats with deep luster finish to match the shaft. Tamperproof stainless steel socket head bolts included.
Collar, ornamental base: spun aluminum, Type FC-11, deep luster finish.
Foundation sleeve and base: #16 ga. galvanized steel, with a steel base plate, 4" larger o.d. than the internal diameter of the sleeve. 6" square setting plate securely welded to the ground spike 6" below the base plate. Ground-spike is 3/4" diameter, 18" long.

Nautical Flagpoles with yardarm
Single mast nautical flagpole, no gaff
Nautical flagpole with gaff
Single mast nautical flagpole, with gaff
Nautical flagpoles
Single mast nautical poles, no gaff

Double Mast Nautical Flagpoles with gaff
Double mast nautical flagpole, with gaff

Available up to 70 ft exposed height

 

Foundation detail
aluminum ground mount excavation requirements & installation diagram

Single Mast Aluminum Shaft Dimensions
includes weight with yardarm & gaff
Double Mast Aluminum Shaft Dimensions
includes weight with yardarm & gaff
Exposed Height Overall Length Butt Dia. Top Dia. Wall Ship Wt.
20 ft 23 ft 5" 3" .125"
.188"
170 lbs.
170 lbs.
25 ft 27 ft 5"
5"
6"
3"
3"
31/2"
.125"
.156"
.188"
182 lbs.
187 lbs.
234 lbs.
30 ft 33 ft 5"
5"
6"
6"
3"
3"
31/2"
3 1/2"
.125"
.156"
.156"
.188"
217 lbs.
225 lbs.
277 lbs.
280 lbs.
35 ft 38 1/2 ft 5"
6"
7"
7"
3 1/2"
3 1/2"
3 1/2"
3 1/2"
.188"
.156"
.156"
.188"
289 lbs.
307 lbs.
321 lbs.
341 lbs.
40 ft 44 ft 7"
8"
8"
3 1/2"
3 1/2"
3 1/2"
.156"
.156"
.188"
356 lbs.
377 lbs.
388 lbs.
45 ft 49 ft 8" 3 1/2" .188" 445 lbs.
50 ft 55 ft 8"
10"
3 1/2"
4"
.188"
.188"
528 lbs
608 lbs.
60 ft 66 ft 10" 4" .188"
.250"
785 lbs.
867 lbs.
70 ft 77 ft 10"
12"
4" .321"
.250"
1157 lbs
1103 lbs
80 ft 88 ft 12" 4" .375" 1499 lbs

Exposed Height Overall Length Butt Dia. Top Dia. Wall Ship Wt.
20 ft 23 ft 5" 3" .188" 284 lbs.
25 ft 27 ft 6" 3 1/2" .188" 330 lbs.
30 ft 33 ft 6" 3 1/2" .188" 391 lbs.
35 ft 38 1/2 ft 7" 3 1/2" .188" 438 lbs.
40 ft 44 ft 8" 3 1/2" .188" 495 lbs.
45 ft 49 ft 8" 3 1/2" .188" 658 lbs.
50 ft 55 ft 10" 4" .188" 996 lbs.
60 ft 66 ft 12" 4" .250" 1153 lbs
70 ft 77 ft 12" 4" .312" 1549 lbs
Aluminum Yardarm Dimensions
Cone tapered for single mast nautical poles. May be ordered separately. Yardarms are supplied with end pulleys, two lengths of halyard with swivel flag snaps & snap covers, two 9" cast aluminum cleats plus mounting hardware.
Aluminum Gaff Dimensions
Cone tapered for single mast nautical poles. May be ordered separately. Gaffs are supplied with one end pulley, one length of halyard with swivel flag snaps & snap covers, one 9" cast cleat with mounting screws plus mounting hardware.
Pole Height / Ft. Length / Ft. Center diameter Diameter at ends Shipping Wt. / lbs.
20 6 3 1/2" 2" 31
25 6.5 3 1/2" 2" 33
30 8.5 3 1/2" 2" 40
35 9.5 3 1/2" 2" 43
40/45 11 3 1/2" 2" 52
50 13 3 1/2" 2" 59
60 14 3 1/2" 2" 70
70 16 3 1/2" 2" 75
80 18 3 1/2" 2" 85
Pole Height / Ft. Length / Ft. Center Diameter Diameter at Ends Shipping Wt. / Lbs
20 5 3 1/2" 2" 30
25 5.5 3 1/2" 2" 30
30 6.5 3 1/2" 2" 33
35 7.5 3 1/2" 2" 37
40/45 9 3 1/2" 2" 42
50 10 3 1/2" 2" 46
60 12 3 1/2" 2" 53
70 14 3 1/2" 2" 60
80 16 3 1/2" 2" 70

FIBERGLASS NAUTICAL FLAGPOLES
Single Mast Poles with Yardarm: 20-40 ft exposed heights

Made in the U.S.A. 20 year warranty on fiberglass shafts.
Ground Mounted (external halyard) with a fiberglasss foundation sleeve
Hinge Base ( external halyard)
substitutes an anchor bolt configuration in place of a foundation sleeve. The hinged base plate sits at the top of the anchor bolts.

STANDARD FITTINGS: anodized gold ball, halyard, cleat, ground sleeve or tilting base, square base cover, and all accessories needed for installation. Yardarm set for fiberglass nautical flagpoles includes 2 pulleys, 2 cleats (mounted on pole), 2 halyards. Yardarms are located approximately one-third the distance from the top of the flagpole.

FINISH - WHITE
A high-quality gelcoat finish insures the brilliant white surface will not dull over time and exposure. The gel coat is mixed with the fiberglass resin to produce a composite with the same color throughout the wall thickness. Fiberglass poles are NOT painted. Custom colored fiberglass shafts by quote.

Advantages
Fiberglass flagpoles will not pit or corrode and the finish will not stain or discolor.The pole shafts are maintenance-free and will not attract lightning or conduct electricity. Fiberglass flagpoles are light in weight for easier installation.

Yardarm assembly instructions

Fiberglass nautical flagpole
Fiberglass nautical flagpole with flags
Specifications: Fiberglass Nautical Flagpoles      
Exposed height Butt dia. Top dia. Yardarm
length
Yardarm
from pole top
Wind Speed
unflagged
Flag Size Wind Speed
Flagged
Shipping Wt.
20 ft. 4 3/16" 2 3/4" 6 ft 6.5 ft 210 mph 3x5' 170 mph 42 lbs
25 ft. 4 1/2" 2 3/4" 6.5 ft 8 ft 190 mph 4x6' 150 mph 58 lbs
30 ft. 4 7/8" 2 3/4" 8 ft 10 ft 170 mph 5x8' 130 mph 74 lbs
35 ft. 5 1/4" 2 3/4" 9.5 ft 11.5 ft 160 mph 6x10' 120 mph 96 lbs
40 ft. 5 2/3" 2 3/4" 11 ft 13.5 ft 140 mph 6x10' 110 mph 120 lbs
Yardarm close-up, fiberglass nautical poles
Yardarm detail for fiberglass nautical flagpole

Flashing collar, fiberglass pole
Fiberglass base with flashing collar
Flagpole gold ball top
Anodized ball top
Truck assembly, fiberglass
Revolving truck assembly, fiberglass poles
Tilt hinge base hardware
Optional hinged / tilting base

 


About Embassy Flag
Embassy Flag Copyright