WASHINGTON STATE FLAG Washington flags, desktop flags, flag lapel pins Order all Washington flag items from the pull down menu below or see Bulk Pricing.
Order Menu Washington   12"x18" Nylon 14.80 2'x3' Nylon 41.60 3'x5' Nylon 77.90 4'x6' Nylon 123.30 5'x8' Nylon 165.60 3'x5' Woven Poly 86.80 4'x6' Woven Poly 126.50 5'x8' Woven Poly 185.60 6'x10' Nylon 217.00 8'x12' Nylon 265.00 10'x15' Nylon 379.90 12'x18' Nylon 498.50 3'x5' Indoor nylon w/fringe 103.90 4'x6' Indoor nylon w/fringe 145.00 Desktop Flag 3.50 Lapel Pin 2.50 Friendship Pin 2.50 Washington state flags are USA made, double side construction for 2x3 ft and larger. 200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max) Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.	Washington Indoor Flag Nylon with pole hem and fringe Indoor / Parade flagpoles & accessories
Washington boat flag, ensign, courtesy flag 12"x18" 200 denier nylon finished with heading and brass grommets.	Washington Desktop Flag 4"x6" soft nylon miniature flag mounted on a 10" black staff with golden spear point
Washington state flag lapel pin Etched & Die Struck Enamel flag lapel pins on brass 3/4" to 1" (19 to 24 mm)	Desktop Flag Stands / Bases - for 4"x6" desktop flags # 1-7 hole black plastic, #10 & 12 hole wood Mini Flag Holder   1 hole 0.85 2 hole 1.25 3 hole 1.25 4 hole 1.65 5 hole 1.65 6 hole 1.95 7 hole 1.95 10 hole 12.50 12 hole 14.50
Washington / USA friendship flag lapel pin (crossed flag lapel pin)
PRODUCT DESCRIPTIONS Washington outdoor state flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. All indoor and outdoor Washingon state flags 2x3 ftand larger are double sided, reading correctly on both sides. Extra large outdoor nylon Washington state flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard. Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max. Washington boat flags are nylon, 12”x18” size with 2 brass grommets. Washington indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes. Washington desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags. Washington stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order. Washington state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order. FLAG DESCRIPTION / HISTORY Year Adopted: 1923 The flag of Washington State is dark green centered with the state seal. Washington State flags are produced double sided, meaining the seal reads correct on both sides. The state seal was designed in 1889 by Olympia jeweler Charles Talcott and consists of a facial image of George Washington on a blue background and encircled by a gold ring with black lettering reading "The Seal of the State of Washington 1889". (ref; leg.wa.gov, RCW 1.20.010, State Flag) After the Oregon Treaty resolved a border dispute with the British, the Oregon Territory was created by Congress in 1848 and included current day Washington state. In 1853 Oregon and Washington were split into separate territories. In 1889 Washington was admitted to the Union as the 42nd state.