OHIO STATE FLAG Ohio flags, desktop flags, lapel pins Order all Ohio flag items from the pull down menu below or see Bulk Pricing.
Order Menu Ohio   12"x18" Nylon 14.80 2'x3' Nylon 26.00 3'x5' Nylon 38.60 4'x6' Nylon 55.60 5'x8' Nylon 87.20 3'x5' Woven Poly 48.30 4'x6' Woven Poly 68.90 5'x8' Woven Poly 99.60 6'x10' Nylon 164.50 8'x12' Nylon 233.50 10'x15' Nylon 348.80 3'x5' Indoor nylon w/fringe 64.10 4'x6' Indoor nylon w/fringe 82.80 Desktop Flag 3.50 Lapel Pin 2.50 Friendship Pin 2.50 Ohio state flags are USA made. 200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max) Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.	Ohio Indoor Flag Nylon with pole hem and fringe Indoor / Parade flagpoles & accessories
Ohio boat flag, ensign, courtesy flag 12"x18" 200 denier nylon finished with heading and brass grommets.	Ohio Desktop Flag 4"x6" soft nylon, mounted on a 10" black staff with golden spear point
Ohio state flag lapel pin Etched & Die Struck Enamel flag lapel pins on brass 3/4" to 1" (19 to 24 mm)	Desktop Flag Stands / Bases - for 4"x6" desktop flags # 1-7 hole black plastic, #10 & 12 hole wood Mini Flag Holder   1 hole 0.85 2 hole 1.25 3 hole 1.25 4 hole 1.65 5 hole 1.65 6 hole 1.95 7 hole 1.95 10 hole 12.50 12 hole 14.50
Ohio / USA friendship flag lapel pin (crossed flag lapel pin)
PRODUCT DESCRIPTIONS Ohio outdoor state flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Extra large outdoor nylon Ohio flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard. Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max. Ohio boat flags are nylon, 12”x18” size with 2 brass grommets. Ohio indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes. Ohio desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags. Ohio stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order. Ohio classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order. FLAG DESCRIPTION / HISTORY Year Adopted: 1902. Ohio was once part of the Northwest Territory created by the United States in 1787, after Britian ceded claims to its western territoires at the end of the American Revolution. Ohio became the the 17th state in 1803. The Ohio burgee, as the swallow-tailed design is properly called, was designed in 1901 by John Eisenmann, architect and designer for Ohio Building at the Pan-American Exposition being held in Buffalo, New York. The Ohio flag has three red and two white horizontal stripes. At its staff end, in a blue triangular field whose apex is at the center of the middle red stripe, are 17 white, five-pointed stars grouped around a red disc superimposed upon a white circular O. Mr. Eisenmann explained the Ohio flag’s symbolism: “The triangles formed by the main lines of the flag represent the hills and valleys as typified in the State Seal, and the stripes the roads and waterways. The stars, indicating the 13 original states of the Union, are grouped about the circle which represents the Northwest Territory; and that Ohio was the seventeenth state admitted into the Union is shown by adding four more stars. The white circle with its red center, not only represents the initial letter of Ohio, but is suggestive of it being the Buckeye State.” (ref; ohiohistorycentral.org)