NORTH DAKOTA STATE FLAG North Dakota flags, desktop flags, flag lapel pins Order all North Dakota flag items from the pull down menu below or see Bulk Pricing.
Order Menu North Dakota   12"x18" Nylon 14.80 2'x3' Nylon 26.00 3'x5' Nylon 38.60 4'x6' Nylon 57.00 5'x8' Nylon 89.40 3'x5' Woven Poly 48.30 4'x6' Woven Poly 68.90 5'x8' Woven Poly 99.60 6'x10' Nylon 167.80 8'x12' Nylon 234.50 10'x15' Nylon 289.60 12'x18' Nylon 319.70 3'x5' Indoor nylon w/fringe 64.10 4'x6' Indoor nylon w/fringe 84.90 Desktop Flag 3.50 Lapel Pin 2.50 Friendship Pin 2.50 North Dakota state flags are USA made. 200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max) Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.	North Dakota Indoor Flag Nylon with pole hem and fringe Indoor / Parade flagpoles & accessories
North Dakota boat flag, ensign, courtesy flag 12"x18" 200 denier nylon finished with heading and brass grommets.	North Dakota Desktop Flag 4"x6" soft nylon miniature flag mounted on a 10" black staff with golden spear point
North Dakota state flag lapel pin Etched & Die Struck Enamel flag lapel pins on brass 3/4" to 1" (19 to 24 mm)	Desktop Flag Stands / Bases - for 4"x6" desktop flags # 1-7 hole black plastic, #10 & 12 hole wood Mini Flag Holder   1 hole 0.85 2 hole 1.25 3 hole 1.25 4 hole 1.65 5 hole 1.65 6 hole 1.95 7 hole 1.95 10 hole 12.50 12 hole 14.50
North Dakota / USA friendship flag lapel pin (crossed flag lapel pin)
PRODUCT DESCRIPTIONS North Dakota outdoor state flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Extra large outdoor nylon state flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard. Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max. North Dakota boat flags are nylon, 12”x18” size with 2 brass grommets. North Dakota indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes. North Dakota desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags. North Dakota stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order. State classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order. FLAG DESCRIPTION /HISTORY Year Adopted: 1911. Acquired by the United States with the Louisiana Purchase of 1803, and renamed the Missouri Territory in 1812, North Dakota was as part of the organized Dakota Territory in 1861. North Dakota was admitted as the 39th state in 1889. The North Dakota flag is similar to the flag used by North Dakota soldiers who fought alongside Theodore Roosevelt in the Spanish-American War in 1898. In 1911, the Legislative Assembly added the words “North Dakota” to this flag and adopted it as the official North Dakota state flag. The North Dakota flag contains a centered emblem that shows a bald eagle holding an olive branch, which is a symbol of peace, and a bundle of arrows in its claws. In the eagle’s beak is a ribbon with the Latin words “E Pluribus Unum” which means “many uniting into one.” This refers to the many states uniting into one nation. The eagle has 13 stars above its head and a shield with 13 red and white stripes in front of it. The stars and stripes stand for the first 13 states in the United States. Below the eagle is a red scroll with the words “North Dakota.” The colors for the state shield are defined in detail and can be viewed in this file. (ref; history.nd.gov, North Dakota State Flag Official details)