MINNESOTA STATE FLAG Minnesota flags, desktop flags, flag lapel pins Order all Minnesota flag items from the pull down menu below or see Bulk Pricing.
Order Menu Minnesota   12"x18" Nylon 14.80 2'x3' Nylon 26.00 3'x5' Nylon 38.60 4'x6' Nylon 57.00 5'x8' Nylon 89.40 3'x5' Woven Poly 48.30 4'x6' Woven Poly 68.90 5'x8' Woven Poly 99.60 6'x10' Nylon 167.80 8'x12' Nylon 234.50 10'x15' Nylon 289.60 12'x18' Nylon 319.70 3'x5' Indoor nylon w/fringe 64.10 4'x6' Indoor nylon w/fringe 84.90 Desktop Flag 3.50 Lapel Pin 2.50 Friendship Pin 2.50 Minnesota state flags are USA made. 200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max) Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.	Minnesota Indoor Flag Nylon with pole hem and fringe Indoor / Parade flagpoles & accessories
Minnesota boat flag, ensign, courtesy flag 12"x18" 200 denier nylon finished with heading and brass grommets.	Minnesota Desktop Flag 4"x6" soft nylon miniature flag mounted on a 10" black staff with golden spear point
Minnesota state flag lapel pin Etched & Die Struck Enamel flag lapel pins on brass 3/4" to 1" (19 to 24 mm)	Desktop Flag Stands / Bases - for 4"x6" desktop flags # 1-7 hole black plastic, #10 & 12 hole wood Mini Flag Holder   1 hole 0.85 2 hole 1.25 3 hole 1.25 4 hole 1.65 5 hole 1.65 6 hole 1.95 7 hole 1.95 10 hole 12.50 12 hole 14.50
Minnesota / USA friendship flag lapel pin (crossed flag lapel pin)
PRODUCT DESCRIPTIONS Minnesota outdoor state flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Extra large outdoor nylon Minnesota flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard. Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max. Minnesota boat flags are nylon, 12”x18” size with 2 brass grommets. Minnesota indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes. Minnesota desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags. Minnesota stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order. Minnesota classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order. FLAG DESCRIPTION / HISTORY Year Adopted: 1957 The area of Minnesota was annexed to the United States with the Louisiana Purchase of 1803. Organized as the Minnesota Territoy in 1849, it was admitted as the 23rd state in 1858. This was a period of rapid regional expansion and various parts of current Minnesota were also once part of other jurisdictions, including the Territory Northwest of the Ohio, and the Territories of Indiana, Illinois, Missouri, Michigan, and Wisconsin. The Minnesota state flag, adopted in 1957, is royal blue. In the center of the flag is the state seal. Around the state seal is a wreath of the state flower, the pink and white showy lady slipper. Three dates are woven into the wreath: 1858, the year Minnesota became a state; 1819, the year Fort Snelling was established; and 1893, the year the first official state flag was adopted. Nineteen stars ring the wreath, symbolizing the fact that Minnesota was the nineteenth state to enter the union after the original thirteen. The largest star represents the North Star and Minnesota. The central seal pictures a farmer plowing a field, and an Indian riding a horse. A red banner with yellow letters has the state motto, l'etoile du nord - French for "star of the north." The word "Minnesota" appears in red on the bottom of the white band surrounding the seal. (ref: minnesota.gov, State Flag)