British Ensign, British Navy Flag, nylon flags made in the USA

BRITISH WHITE ENSIGN / BRITISH NAVY FLAG / ST. GEORGE ENSIGN
outdoor nylon flags
Order all British Navy flags from the pull down menu below.

Order Menu

British Navy flags are USA made, material is 200 denier nylon
Outdoor flags are finished with heading and brass grommets up to 6x10 ft.

Custom British Navy / Australian Navy lapel pin
produced for the Australian High Command

UK Navy / Australian Navy custom lapel pin

British Navy outdoor flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor international flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft and 6x10 ft. Flags are available in other sizes made to order.

British Navy indoor flags are made to order.
Available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are available finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only with no fringe. All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

About Embassy Flag

Country Flags A-C

Country Flags D-K

Country Flags L-Q

Country Flags R-Z

Popular World Flags

International Organization Flags

US State Flags A-M

US State Flags N-W

US Cities

US Military

Boating Marine

BRITISH WHITE ENSIGN / BRITISH NAVY FLAG / ST. GEORGE ENSIGN outdoor nylon flags Order all British Navy flags from the pull down menu below.
Order Menu British Navy flags are USA made, material is 200 denier nylon Outdoor flags are finished with heading and brass grommets up to 6x10 ft.
Custom British Navy / Australian Navy lapel pin produced for the Australian High Command
British Navy outdoor flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor international flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft and 6x10 ft. Flags are available in other sizes made to order. British Navy indoor flags are made to order. Available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are available finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only with no fringe. All indoor flags are USA made. 3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.
About Embassy Flag